Materials Design and Engineering

2015

Electrochemical separation of Dy and Nd from Nd magnet scrap in a molten LiCl-KCl

Konishi, H., Ono, H., Takeuchi, E., Nohira, T. & Oishi, T., 2015, p. 287-294. 8 p.

Research output: Contribution to conference › Paper › peer-review

2012

DEVELOPMENT OF AGE-HARDENING TECHNOLOGY FOR ULTRAFINE-GRAINED Al-Li-Cu ALLOYS FABRICATED BY HIGH-PRESSURE TORSION

Motoshima, H., Hirosawa, S., Lee, S., Horita, Z., Matsuda, K. & Terada, D., 2012, p. 939-944. 6 p.

Research output: Contribution to conference › Paper

Effects of laser-peening parameters on plastic deformation of SUS316L

Mizuta, K., Tsuyama, M., Takahashi, M., Shibayanagi, T. & Nakano, H., 2012, p. 1192-1195. 4 p.

Research output: Contribution to conference › Paper › peer-review

2011

Topography of grain boundaries varied by short pulse laser irradiation for controlling microstructures of metals

Tone, D., Tsukamoto, M., Shibayanagi, T., Motokoshi, S. & Abe, N., 2011, p. 1247-1250. 4 p.

Research output: Contribution to conference › Paper › peer-review

2009

Effective use of hydrogen in gaseous reduction of iron ore agglomerates with H₂-CO

Tateo, U., Tsunehisa, N., Hideki, O., Hirokazu, K. & Hirotoshi, K., 2009, p. 1179-1184. 6 p.

Research output: Contribution to conference › Paper › peer-review

5 Scopus citations

Hydrogen reduction behavior of composite iron ore sinter

Ono, H., Dohi, Y., Arikata, Y. & Usui, T., 2009, p. 144-148. 5 p.

Research output: Contribution to conference › Paper › peer-review

2007

Development of new pressure vessel with new material for underwater vehicle

Hyakudome, T., Tsukioka, S., Shojiro, I., Watanabe, Y., Yoshida, H., Aoki, T., Aoki, Y., Madarame, H., Takahashi, T. & Tsukeda, T., 2007, p. 1126-1129. 4 p.

Research output: Contribution to conference › Paper

1 Scopus citations

Recycling of Mg-Al-Ca based alloy by vacuum distillation

Inoue, M., Shima, N. & Tsukeda, T., 2007, p. 223-226. 4 p.

Research output: Contribution to conference › Paper

1 Scopus citations

2006

Carbon deposition conditions on metallic iron from CO-CO₂ mixture

Ono-Nakazato, H., Koyama, T. & Usui, T., 2006, p. 89-92. 4 p.

Research output: Contribution to conference › Paper › peer-review

Fabrication of CaCO₃/SWNT nanocomposite using fullerodendron-assisted approach

Sako, Y., Hayakawa, S., Takaguchi, Y. & Tsuboi, S., 2006, p. 5093-5094. 2 p.

Research output: Contribution to conference › Paper › peer-review

Fabrication of field-effect transistor devices with new type of fullerodendron

Sako, Y., Takaguchi, Y., Kusai, Y., Takayuki, N. & Yoshihiro, K., 2006, p. 1375. 1 p.

Research output: Contribution to conference › Paper › peer-review

Fullerodendron assisted ispersion of single walled carbon anotubes

Morimoto, Y., Takaguchi, Y. & Tsueoi, S., 2006, p. 2601-2602. 2 p.

Research output: Contribution to conference › Paper › peer-review

Microstructures on metal plate produced with femtosecond laser

Tsukamoto, M., Asuka, K., Nakano, H., Komizo, Y., Shibayanagi, T., Fujita, M., Hashida, M., Katto, M. & Abe, N., 2006.

Research output: Contribution to conference › Paper › peer-review

Morphological control of C₆₀ by a fullerodendron-assisted approach

Takaguchi, Y., Tamura, M. & Tsuboi, S., 2006, p. 1224. 1 p.

Research output: Contribution to conference › Paper › peer-review

Nitrogen fixation using vaterite particles of CaCO₃ conteining fullerodendrons

Talukdar, B., Takaguchi, Y., Sako, Y. & Tsuboi, S., 2006, p. 1672. 1 p.

Research output: Contribution to conference › Paper › peer-review

Self-assemblv and photoreactivity of novel Di-substituted anthracene derivatives sho

Kaneko, Takaguchi, Y., Tsuboi, S., Ichihara, M. & Ohta, K., 2006, p. 404. 1 p.

Research output: Contribution to conference › Paper › peer-review

Self-assembly and photoreactivity of anthryl dendron having cyanobiphenyl groups as the terminals

Sako, Y., Takaguchi, Y. & Tsuboi, S., 2006, p. 403. 1 p.

Research output: Contribution to conference › Paper › peer-review

Synthesis of characterization of poly(amidoamine) dendron having 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) at the focal point

Mayahara, M., Takaguchi, Y. & Tsuboi, S., 2006, p. 639. 1 p.

Research output: Contribution to conference › Paper › peer-review

The microstructures and mechanical properties of hot-processed magnesium casting alloys

Translated title of the contribution: The microstructures and mechanical properties of hot-processed magnesium casting alloysYamaguchi, T., Tsukeda, T., Saito, K. & Kawamura, Y., 2006, p. 775-780. 6 p.

Research output: Contribution to conference › Paper

3 Scopus citations

2005

Chemical analysis of the cube phase in Al-Mg-Si alloy by EFTEM

Matsuda, K., Ishida, Y., Mullerova, I., Frank, L. & Ikeno, S., 2005, p. 371-376. 6 p.

Research output: Contribution to conference › Paper › peer-review

Newly developed heat resistant magnesium alloy by thixomolding®

Translated title of the contribution: Newly developed heat resistant magnesium alloy by thixomolding®Tsukeda, T., Saito, K., Suzuki, M., Koike, J. & Maruyama, K., 2005, p. 287-290. 4 p.

Research output: Contribution to conference › Paper

2 Scopus citations

Supramolecular wrapping around single-walled carbon nanotubes with fullerodendrons

Tamura, M., Takaguchi, Y., Tsuboi, S., Uchida, T., Shimamura, K., Kimura, S. I., Wakahara, T., Maeda, Y. & Akasaka, T., 2005, p. 902. 1 p.

Research output: Contribution to conference › Paper › peer-review

1 Scopus citations

Synthesis and characterization of fullerodendron

Tamura, M., Omote, T., Tsuboi, S. & Takaguchi, Y., 2005, p. 452. 1 p.

Research output: Contribution to conference › Paper › peer-review

The latest technology trends on thixomolding® of magnesium alloys

Translated title of the contribution: The latest technology trends on thixomolding® of magnesium alloysTsukeda, T., Saito, K., Takeya, K. & Kitamura, K., 2005, p. 325-328. 4 p.

Research output: Contribution to conference › Paper

1 Scopus citations

2004

Effect of forced-air cooling on thixo-extrusion of mechanicall stirred Al-10%Mg and Al-5.5%Zn-2.5%Mg-1.5%Cu alloy billets

Uetani, Y., Sueda, H., Takagi, H., Matsuda, K. & Ikeno, S., 2004, p. 985-992. 8 p.

Research output: Contribution to conference › Paper › peer-review

2003

Electrochemical corrosion studies of thixomolded AZ91D alloy in sodium chloride solution

Translated title of the contribution: Electrochemical corrosion studies of thixomolded AZ91D alloy in sodium chloride solutionNakatsugawa, I., Takayasu, H., Araki, K. & Tsukeda, T., 2003, p. 845-850. 6 p.

Research output: Contribution to conference › Paper

8 Scopus citations

2002

Improvement of Mechanical Properties in Thixomolded MG Alloy AZ91D by Friction Stir Welding

Translated title of the contribution: Improvement of Mechanical Properties in Thixomolded MG Alloy AZ91D by Friction Stir WeldingPark, S. H. C., Sato, Y. S., Kokawa, H. & Tsukeda, T., 2002, p. 267-272. 6 p.

Research output: Contribution to conference › Paper