Materials Design and Engineering

2020

Corrosion resistance of the sintered fe-cu-c, fe-cu-ni-mo-c and fe-cr-mo-c alloys coated with a rust preventive oil

Sunada, S., Hatakeyama, M., Hibino, K., Tagishi, K., Mizukoshi, Y., Takeuchi, S., Maekawa, Y. & Nagase, N., 2020, Physical Properties and Application of Advanced Materials. Matsuda, K., Mai Khanh, P., Khanh, D. Q. & Lich, L. V. (eds.). Trans Tech Publications Ltd, p. 54-63 10 p. (Materials Science Forum; vol. 985 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Removal of tramp elements from molten iron for recycling ferrous scraps

Ono, H., 2020, Physical Properties and Application of Advanced Materials. Matsuda, K., Mai Khanh, P., Khanh, D. Q. & Lich, L. V. (eds.). Trans Tech Publications Ltd, p. 74-79 6 p. (Materials Science Forum; vol. 985 MSF).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2018

Electrochemical formation of Dy-Fe and Nd-fe alloys in molten CaCl₂-LiCl systems

Konishi, H., Hua, H., Ono, H., Koizumi, Y., Oishi, T. & Nohira, T., 2018, ECS Transactions. Reichert, W. M., Mantz, R. A., Trulove, P. C., Haverhals, L. M., Biddinger, E. J., De Long, H. C., Suroviec, A. H., Mizuhata, M., Ueda, M., Ispas, A., Bund, A. & Durkin, D. P. (eds.). 14 ed. Electrochemical Society Inc., p. 321-328 8 p. (ECS Transactions; vol. 86, no. 14).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

11 Scopus citations

Interaction coefficients of alloying elements on copper and tin in iron

Ono, H., Konishi, H. & Maeda, T., 2018, ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0. Associazione Italiana di Metallurgia, (ICS 2018 - 7th International Congress on Science and Technology of Steelmaking: The Challenge of Industry 4.0).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2014

Surface morphology of YSZ thin films deposited from a precursor solution under the electrical fields

Saiki, A., Hamada, K. & Hashizume, T., 2014, Innovative Processing and Manufacturing of Advanced Ceramics and Composites II - A Collection of Papers Presented at the 10th Pacific Rim Conference on Ceramic and Glass Technology, PacRim 2013. American Ceramic Society, p. 193-199 7 p. (Ceramic Transactions; vol. 243).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2013

Age-hardening behavior of deformed excess Mg-type Al-Mg-Si alloys

Ogawa, Y., Ikeno, S., Yoshimura, Y., Kita, K. & Matsuda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1191-1196 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Effect of Cu / Ag addition on the age-hardening behavior in Al-Mg-Ge alloys

Matsuura, K., Matsuda, K., Murakami, T. & Ikeno, S., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1217-1222 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Magnetism and electronic structure calculations of Pd-TM alloys and hydrogen systems

Nunomura, N., Hara, M. & Akamaru Information Technology Center, S., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1837-1841 5 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 3).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Microstructure evolution of AZ91D magnesium alloy during extrusion-torsion simultaneous processing

Furui, M., Sakashita, S., Shimojima, K., Aida, T., Terayama, K., Ishisaka, Y., Yamamoto, M. & Ohta, M., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1323-1328 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Variation of aging behavior for Cu or Ag addition Al-Zn-Mg alloys

Watanabe, K., Ikeno, S., Yoshida, T., Murakami, S. & Matsuda, K., 2013, 8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8. John Wiley and Sons Inc., p. 1349-1354 6 p. (8th Pacific Rim International Congress on Advanced Materials and Processing 2013, PRICM 8; vol. 2).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2012

Oxidation resistance and self hardening of CrAlN/BN nanocomposite coatings

Nose, M., Watanuki, T., Kawabata, T., Hatano, Y., Matsuda, K. & Ikeno, S., 2012, THERMEC 2011. Trans Tech Publications Ltd, p. 2559-2564 6 p. (Materials Science Forum; vol. 706-709).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Simulative testing of friction and lubrication in cold forging of steel and aluminum

Ceron, E., Bay, N., Aida, T., Dohda, K. & Nicolaisen, T. E., 2012, 40th North American Manufacturing Research Conference 2012 - Transactions of the North American Manufacturing Research Institution of SME. p. 287-296 10 p. (Transactions of the North American Manufacturing Research Institution of SME; vol. 40).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

12 Scopus citations

2011

Effects of back-torsion working on thread rolling workability at room temperature of AZ31B magnesium alloy

Mizushima, K., Aida, T., Takatsuji, N., Furui, M., Ohta, M., Ishizaka, Y. & Yamamoto, M., 2011, Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. p. 100-102 3 p. (Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

2010

Microstructure and mechanical properties of Cr-Al-B-N coatings prepared by reactive D.C. and R.F. Co-sputtering

Nose, M., Kawabata, T., Ueda, S., Fujii, K., Matsuda, K. & Ikeno, S., 2010, THERMEC 2009. Chandra, T., Chandra, T., Chandra, T., Wanderka, N., Wanderka, N., Wanderka, N., Reimers, W., Reimers, W., Reimers, W., Ionescu, M., Ionescu, M. & Ionescu, M. (eds.). Trans Tech Publications Ltd, p. 781-786 6 p. (Materials Science Forum; vol. 638-642).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Superconductive property and microstructure of MgB₂ particle-dispersed aluminum based composite materials

Mizutani, M., Matsuda, K., Makino, K., Nishimura, K., Kawabata, T., Hishinum, Y., Aoyama, S. & Ikeno, S., 2010, PRICM7. Trans Tech Publications Ltd, p. 2759-2762 4 p. (Materials Science Forum; vol. 654-656).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2007

Crystal structure of the β'-phase in Al-Mg-Si-Ag alloy

Matsuda, K., Nakamura, J., Nakamura, Y., Sato, T. & Ikeno, S., 2007, Supplement to THERMEC 2006, 5th International Conference on PROCESSING and MANUFACTURING OF ADVANCED MATERIALS, THERMEC 2006. PART 1 ed. Trans Tech Publications Ltd, p. 837-841 5 p. (Materials Science Forum; vol. 539-543, no. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

4 Scopus citations

Development of new pressure vessel with new material for underwater vehicle

Hyakudome, T., Tsukioka, S., Shojiro, I., Watanabe, Y., Yoshida, H., Aoki, T., Aoki, Y., Madarame, H., Takahashi, T. & Tsukeda, T., 2007, Proceedings of The Seventeenth 2007 International Offshore and Polar Engineering Conference, ISOPE 2007. p. 1126-1129 4 p. (Proceedings of the International Offshore and Polar Engineering Conference).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

HRTEM observation of rod-shape precipitates in Al-Mg-Si-Ag alloy aged at 523 K

Nakamura, J., Matsuda, K., Nakamura, Y., Sato, T. & Ikeno, S., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 ed. Trans Tech Publications Ltd, p. 243-246 4 p. (Materials Science Forum; vol. 561-565, no. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

Recycling of Mg-Al-Ca based alloy by vacuum distillation

Inoue, M., Shima, N. & Tsukeda, T., 2007, Selected, peer reviewed papers from The Sixth Pacific Rim International Conference on Advanced Materials and Processing, PRICM 6. PART 1 ed. Trans Tech Publications Ltd, p. 223-226 4 p. (Materials Science Forum; vol. 561-565, no. PART 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2006

The microstructures and mechanical properties of hot-processed magnesium casting alloys

Yamaguchi, T., Tsukeda, T., Saito, K. & Kawamura, Y., 2006, Nanomaterials by Severe Plastic Deformation, NanoSPD3 - Proceedings of the 3rd International Conference on Nanomaterials by Severe Plastics Deformation. Trans Tech Publications Ltd, p. 775-780 6 p. (Materials Science Forum; vol. 503-504).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

2005

Newly developed heat resistant magnesium alloy by thixomolding®

Tsukeda, T., Saito, K., Suzuki, M., Koike, J. & Maruyama, K., 2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Trans Tech Publications Ltd, p. 287-290 4 p. (Materials Science Forum; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

The latest technology trends on thixomolding® of magnesium alloys

Tsukeda, T., Saito, K., Takeya, K. & Kitamura, K., 2005, Magnesium - Science, Technology and Applications, Mg - Proceedings of the International Conference on Magnesium - Science, Technology and Applications. Trans Tech Publications Ltd, p. 325-328 4 p. (Materials Science Forum; vol. 488-489).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

2004

Behaviors of chamber wall materials exposed to x-rays and ions under target implosions for inertial fusion energy

Kasuya, K., Kasamatsu, A., Saiki, A., Renk, T. J., Olson, C. L., Notimatsu, T., Kozaki, Y., Yamanaka, T., Nakai, S., Prokopiuk, A. & Mroz, W., 2004, Inertial Fusion Sciences and Applications 2003. Hammel, B. A., Meyerhofer, D. D. & Meyer-ter-Vehn, J. (eds.). p. 805-809 5 p. (Inertial Fusion Sciences and Applications 2003).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

2 Scopus citations

2002

Ablation of various candidate materials for inertial fusion reactor walls-1: Ablated surface thickness with intense pulsed proton beams

Kasuya, K., Renk, T., Kasamatsu, A., Olson, C., Kinoshita, Y., Kamiya, T., Saiki, A., Norimatsu, T., Nagai, K., Yamanaka, T. & Nakai, S., 2002, BEAMS 2002 - 14th International Conference on High-Power Particle Beams. IEEE Computer Society, p. 429-432 4 p. 6219480. (BEAMS 2002 - 14th International Conference on High-Power Particle Beams; vol. 1).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Materials Design and Engineering

Research output

Search results