Materials Design and Engineering

2025

Ag segregation and interfacial characterization of the hexagonal β(Mg₂Si)-phase in Al-Mg-Si-Ag alloy

Ahmed, A., Uttarasak, K., Tsuchiya, T., Lee, S., Nishimura, K., Nunomura, N., Ikeno, S., Malik, A., Shimizu, K., Hirayama, K., Toda, H., Yamaguchi, M., Tsuru, T., Nakamura, J. & Matsuda, K., 2025/02, In: Materials Today Communications. 43, 111835.

Research output: Contribution to journal › Article › peer-review

Open Access

Effect of Deformation on Mechanical Properties and Microstructure of Al-1%Cu-0.96%Mg-0.36%Si (mass%) Alloy

Hai, V. N., Lee, S., Tsuchiya, T., Katsumi, T., Kita, K., Khanh, P. M., Holmestad, R., Marioara, C. D. & Matsuda, K., 2025/02, In: Materials Transactions. 66, 2, p. 220-229 10 p.

Research output: Contribution to journal › Article › peer-review

Effects of σ Phase on the SCC Susceptibility and the Hydrogen Embrittlement Susceptibility of Super Duplex Stainless Steel F55

Matsuo, Y., Hatakeyama, M., Tsugawa, R., Makizaki, K. & Sunada, S., 2025/02, In: Materials Transactions. 66, 2, p. 236-245 10 p.

Research output: Contribution to journal › Article › peer-review

Microstructure observation of T-phase in Al-Zn-Mg alloy with low Zn/Mg ratio

Ahmed, A., Matsuda, K., Lee, S., Tsuchiya, T., Nishimura, K., Nunomura, N., Toda, H., Hirayama, K., Shimizu, K., Yamaguchi, M. & Tsuru, T., 2025/01/05, In: Journal of Alloys and Compounds. 1010, 177781.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

Stress corrosion behavior and microstructure analysis of Al-Zn-Mg-Cu alloys fabricated by CMT wire arc additive manufacturing with different post-treatments

Zou, T., Duan, S., Wu, D., Matsuda, K., Guo, F. & Zou, Y., 2025/01/05, In: Journal of Alloys and Compounds. 1010, 177759.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

繰返し重ね接合圧延（ARB）と高圧スライド（HPS）加工によって作製した超微細粒工業用純アルミニウム（A1050）の機械的性質の比較

Translated title of the contribution: Comparison of Mechanical Properties in Ultrafine Grained Commercial-Purity Aluminum（A1050）Processed by Accumulative Roll Bonding（ARB）and High-Pressure Sliding（HPS）Tang, Y., Fujii, T., Hirosawa, S., Matsuda, K., Terada, D. & Horita, Z., 2025, In: Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals. 89, 1, p. 114-123 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2024

1173 K における含マグネタイト微粉鉱石の水素還元速度の評価

Goto, T., Kato, K., Ono, H. & Ichikawa, K., 2024/12/20, In: 実験力学. 24, 4, p. 191-198 8 p.

Research output: Contribution to journal › Article › peer-review

BNCT pancreatic cancer treatment strategy with glucose-conjugated boron drug

Fujimoto, T., Teraishi, F., Kanehira, N., Tajima, T., Sakurai, Y., Kondo, N., Yamagami, M., Kuwada, A., Morihara, A., Kitamatsu, M., Fujimura, A., Suzuki, M., Takaguchi, Y., Shigeyasu, K., Fujiwara, T. & Michiue, H., 2024/09, In: Biomaterials. 309, 122605.

Research output: Contribution to journal › Article › peer-review

3 Scopus citations

CAE によるマグネシウム蓄電池用 Mg-Al-Ca 系負極材料向け単ロール式急冷凝固噴射ノズルの設計とその検証

Translated title of the contribution: Design and verification of a single roll rapid solidification injection nozzle for Mg-Al-Ca anode material for magnesium rechargeable batteries using by CAEKirimoto, Y., Tsukeda, T., Aida, T., Nemoto, Y., Tabata, H., Haga, T., Kurihara, H. & Suzuki, M., 2024/11/15, In: Keikinzoku/Journal of Japan Institute of Light Metals. 74, 11, p. 491-498 8 p.

Research output: Contribution to journal › Article › peer-review

1 Citation (SciVal)

Combining muon spin relaxation and DFT simulations of hydrogen trapping in Al₆Mn

Shimizu, K., Nishimura, K., Matsuda, K., Akamaru, S., Nunomura, N., Namiki, T., Tsuchiya, T., Lee, S., Higemoto, W., Tsuru, T. & Toda, H., 2024/05/01, In: Scripta Materialia. 245, 116051.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Effect of deep cryogenic treatment on improving the high-temperature impact resistance of Al–Zn–Mg–Cu alloy

Song, H., Zhao, G., Duan, S., Matsuda, K., Guo, F. & Zou, Y., 2024/09, In: Materials Science and Engineering A. 909, 146846.

Research output: Contribution to journal › Article › peer-review

4 Scopus citations

Effect of Partial Substitution of Zr for Ti Solvent on Young’s Modulus, Strength, and Biocompatibility in Beta Ti Alloy

Nomura, Y., Okada, M., Manaka, T., Tsuchiya, T., Iwasaki, M., Matsuda, K. & Ishimoto, T., 2024/06, In: Materials. 17, 11, 2548.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

Evaluation of Conventional Polar Solvents for Extractive Desulfurization of Model Diesel Fuels

Murata, S., Sasaki, Y., Sonobe, R., Hatakeyama, M. & Sunada, S., 2024, In: Journal of the Japan Petroleum Institute. 67, 1, p. 24-29 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Evaluation of hydrogen embrittlement in ODS-Cu, Cu–Cr–Zr, and Cu–Cr alloys using slow strain rate technique test

Hatakeyama, M., Asai, Y., Nakato, D., Nishimura, M., Hatano, Y., Sunada, S. & Sato, K., 2024/03, In: Nuclear Materials and Energy. 38, 101580.

Research output: Contribution to journal › Article › peer-review

Open Access

3 Scopus citations

Examples of Steelmaking Thermochemistry

Ono, H., 2024/01/01, Treatise on Process Metallurgy: Volume 1: Process Fundamentals. Elsevier, p. 437-466 30 p.

Research output: Chapter in Book/Report/Conference proceeding › Chapter › peer-review

Fabrication of Transparent Pt-TiO₂ Sol and Its Photocatalytic Activity for Hydrogen Evolution

Nishiyama, N., Oono, K., Takeuchi, H., Yukimoto, M. & Takaguchi, Y., 2024/09/10, In: ACS Omega. 9, 36, p. 38180-38185 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

Friction Stir Spot Welding of A6063S-T5 with Composite Coated Films

Terumichi, M., Yuki, T. & Toshiya, S., 2024, In: Welding International. 38, 1, p. 67-78 12 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Influence of Morphological Change of Eutectic Si during Homogenization Heat Treatment on the Microstructure and Strength at Elevated Temperatures in Wrought Al-Si-Cu-Mg-Ni Alloy

Sugatani, N., Dohi, M., Tsuchiya, T., Lee, S. & Matsuda, K., 2024, In: Materials Transactions. 65, 2, p. 229-236 8 p.

Research output: Contribution to journal › Article › peer-review

2 Scopus citations

Influence of pre-rolling deformation on distribution characteristics of T₁ precipitate in artificially aged Al-Cu-Li alloy

Duan, S., Guo, F., Ma, W., Liu, Z., Yi, X., Matsuda, K., Li, Y. & Zou, Y., 2024/09/01, In: Journal of Vacuum Science and Technology A: Vacuum, Surfaces and Films. 42, 5, 052701.

Research output: Contribution to journal › Article › peer-review

Mg-Al-Ca 系合金の熱伝導率に及ぼす化学組成とミクロ組織の影響

Translated title of the contribution: Effect of chemical composition and microstructure on the thermal conductivity of Mg-Al-Ca alloysKirimoto, Y., Kondo, N., Ito, M., Tsukeda, T., Aida, T., Tabata, H., Kurihara, H. & Suzuki, M., 2024, In: Keikinzoku/Journal of Japan Institute of Light Metals. 74, 1, p. 9-13 5 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Scopus citations

Microstructure and properties of Al–Zn–Mg–Cu alloy fabricated by cold metal transfer additive manufacturing

Zou, T., Duan, S., Wu, D., Cao, Y., Matsuda, K., Guo, F. & Zou, Y., 2024/05/01, In: Journal of Materials Research and Technology. 30, p. 7816-7821 6 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Scopus citations

Morphology evolution of β-phase in Al-Mg-Si alloys during aging treatment

Ahmed, A., Uttarasak, K., Tsuchiya, T., Lee, S., Nishimura, K., Nunomura, N., Shimizu, K., Hirayama, K., Toda, H., Yamaguchi, M., Tsuru, T., Ikeno, S. & Matsuda, K., 2024/06/15, In: Journal of Alloys and Compounds. 988, 174234.

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

MoSe₂-Sensitized Water Splitting Assisted by C₆₀-Dendrons on the Basal Surface

Tajima, T., Matsuura, T., Efendi, A., Yukimoto, M. & Takaguchi, Y., 2024/12/13, In: Chemistry - A European Journal. 30, 70, e202402690.

Research output: Contribution to journal › Article › peer-review

Open Access

Novel approach to explore hydrogen trapping sites in aluminum: Integrating Muon spin relaxation with first-principles calculations

Shimizu, K., Nishimura, K., Matsuda, K., Nunomura, N., Namiki, T., Tsuchiya, T., Akamaru, S., Lee, S., Tsuru, T., Higemoto, W. & Toda, H., 2024/12/18, In: International Journal of Hydrogen Energy. 95, p. 292-299 8 p.

Research output: Contribution to journal › Article › peer-review

Oxidation of Dibenzothiophene with Molecular Oxygen in the Presence of Aldehydes and Transition Metal Salts

Murata, S., Suzumura, M., Nakayama, S., Morishita, Y., Namura, S., Hatakeyama, M. & Sunada, S., 2024, In: Journal of the Japan Petroleum Institute. 67, 1, p. 15-23 9 p.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

Photocatalytic Ammonia Decomposition Using Dye-Encapsulated Single-Walled Carbon Nanotubes

Tajima, T., Yano, K., Mukai, K. & Takaguchi, Y., 2024/10, In: Catalysts. 14, 10, 715.

Research output: Contribution to journal › Article › peer-review

Open Access

1 Scopus citations

Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review

Edalati, K., Ahmed, A. Q., Akrami, S., Ameyama, K., Aptukov, V., Asfandiyarov, R. N., Ashida, M., Astanin, V., Bachmaier, A., Beloshenko, V., Bobruk, E. V., Bryła, K., Cabrera, J. M., Carvalho, A. P., Chinh, N. Q., Choi, I. C., Chulist, R., Cubero-Sesin, J. M., Davdian, G. & Demirtas, M. & 102 others, Divinski, S., Durst, K., Dvorak, J., Edalati, P., Emura, S., Enikeev, N. A., Faraji, G., Figueiredo, R. B., Floriano, R., Fouladvind, M., Fruchart, D., Fuji, M., Fujiwara, H., Gajdics, M., Gheorghe, D., Gondek, L., González-Hernández, J. E., Gornakova, A., Grosdidier, T., Gubicza, J., Gunderov, D., He, L., Higuera, O. F., Hirosawa, S., Hohenwarter, A., Horita, Z., Horky, J., Huang, Y., Huot, J., Ikoma, Y., Ishihara, T., Ivanisenko, Y., Jang, J. I., Jorge, A. M., Kawabata-Ota, M., Kawasaki, M., Khelfa, T., Kobayashi, J., Kommel, L., Korneva, A., Kral, P., Kudriashova, N., Kuramoto, S., Langdon, T. G., Lee, D. H., Levitas, V. I., Li, C., Li, H. W., Li, Y., Li, Z., Lin, H. J., Liss, K. D., Liu, Y., Cardona, D. M. M., Matsuda, K., Mazilkin, A., Mine, Y., Miyamoto, H., Moon, S. C., Müller, T., Muñoz, J. A., Murashkin, M. Y., Naeem, M., Novelli, M., Olasz, D., Pippan, R., Popov, V. V., Popova, E. N., Purcek, G., de Rango, P., Renk, O., Retraint, D., Révész, Á., Roche, V., Rodriguez-Calvillo, P., Romero-Resendiz, L., Sauvage, X., Sawaguchi, T., Sena, H., Shahmir, H., Shi, X., Sklenicka, V., Skrotzki, W., Skryabina, N., Staab, F., Straumal, B., Sun, Z., Szczerba, M., Takizawa, Y., Tang, Y., Valiev, R. Z., Vozniak, A., Voznyak, A., Wang, B., Wang, J. T., Wilde, G., Zhang, F., Zhang, M., Zhang, P., Zhou, J., Zhu, X. & Zhu, Y. T., 2024/10/15, In: Journal of Alloys and Compounds. 1002, 174667.

Research output: Contribution to journal › Review article › peer-review

Open Access

58 Scopus citations

Solute micro-segregation profile and associated precipitation in cast Al-Mg-Si alloy

Bendo, A., Fellowes, J., Smith, M., Moshtaghi, M., Jin, Z., Matsuda, K., Fan, Z. & Zhou, X., 2024, In: Philosophical Magazine. 104, 19-20, p. 801-827 27 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Strengthening of A5052 aluminum alloy by high-pressure sliding process

Aziz, A. M., Mohamed, I. F., Horita, Z., Omar, M. Z., Sajuri, Z., Othman, N. K., Syarif, J., Gebril, M. A., Ostovan, F., Lee, S., Matsuda, K., Yumoto, M., Takizawa, Y. & Al-Ameri, A. A. H., 2024, (Accepted/In press) In: Journal of Materials Science.

Research output: Contribution to journal › Article › peer-review

Synthesis of 1-Adamantylaminogermylene and Its Chalcogenation Reactions

Yukimoto, M., Kanda, K., Aoki, T., Mizuhata, Y. & Tokitoh, N., 2024/03/01, In: European Journal of Inorganic Chemistry. 27, 7, e202300663.

Research output: Contribution to journal › Article › peer-review

Thermodynamic Analysis on Slag/Metal Reactions in Steelmaking Process Using Direct Reduced Iron and Steel Scraps

Kato, K. & Ono, H., 2024, In: ISIJ International. 64, 6, p. 881-892 12 p.

Research output: Contribution to journal › Article › peer-review

Open Access

Tsai型近似結晶Au-Si-R(R=La,Ce,Pr)の磁性と伝導

室裕司, 並木孝洋, 田山孝, 桑井智彦, 石川明日香, 鈴木慎太郎 & 田村隆治, 2024.

Research output: Contribution to conference › Presentation

Unified Interpretations of Two Kinds of Needle-Shaped Precipitates Using Transmission Electron Microscopy and Small-Angle Neutron Scattering in Aged Al–Mg₂Si(-Cu) Alloys

Kaharudin, A. A., Ohnuma, M., Lee, S., Tsuchiya, T., Asada, Y., Ikeda, K. I., Ohishi, K., Suzuki, J. I., Matsuda, K. & Homma, T., 2024/01, In: Nanomaterials. 14, 2, 176.

Research output: Contribution to journal › Article › peer-review

Open Access

アルミニウム合金の基礎と成形技術

Matsuda, K., Ikeda, K., Nishi, N., Sakurai, T., Kuwabara, T., Yoshida, K., Takatsuji, N., Funazuka, T., Maeda, M., Aso, H., Kikuchi, T. & Yamagishita, T., 2024/11/07, コロナ社. 210 p.

Research output: Book/Report › Book › peer-review

カーボンナノチューブ光触媒を用いた人工光合成

高口豊, 2024.

Research output: Contribution to conference › Presentation

低コスト・高性能マグネシウム蓄電池用負極の材質および製法

Translated title of the contribution: Materials and manufacturing process of anode for low-cost, high-performance magnesium rechargeable batteriesTsukeda, T., 2024, In: Keikinzoku/Journal of Japan Institute of Light Metals. 74, 5, p. 227-232 6 p.

Research output: Contribution to journal › Review article › peer-review

3 Scopus citations

単ロール式急冷凝固にて作製したマグネシウム蓄電池用Mg-9%Al-3%Ca 系負極材料薄帯の製造条件による諸特性評価

Translated title of the contribution: Evaluation of various properties of ribbons of Mg-9%Al-3%Ca-based anode material for magnesium batteries produced by single-roll rapid solidificationKirimoto, Y., Tsukeda, T., Aida, T., Tabata, H., Kurihara, H., Suzuki, M. & Haga, T., 2024/10, In: Keikinzoku/Journal of Japan Institute of Light Metals. 74, 10, p. 455-462 8 p.

Research output: Contribution to journal › Article › peer-review

急冷凝固法によるマグネシウム蓄電池用Mg-Al-Ca 系負極材料薄帯の電気化学活性に及ぼす Cu 添加の影響

Translated title of the contribution: Effect of Cu addition on electrochemical activity of ribbons of Mg-Al-Ca anode materials for magnesium rechargeable batteries manufactured by rapid solidification methodFukui, S., Tsukeda, T., Aida, T., Tabata, H., Kurihara, H. & Suzuki, M., 2024, In: Keikinzoku/Journal of Japan Institute of Light Metals. 74, 1, p. 14-17 4 p.

Research output: Contribution to journal › Article › peer-review

Open Access

2 Scopus citations

溶融Al-Mg合金中Mg₃₂(Al,Cu)₄₉金属間化合物の生成に関する熱力学的研究

Shinomiya, Y., Kato, K. & Ono, H., 2024/12/20, In: 実験力学. 24, 4, p. 199-204 6 p.

Research output: Contribution to journal › Article › peer-review

溶融Fe–18mass%Cr合金中Mo, B, Ni, Ti, NbとSn間の相互作用係数

Translated title of the contribution: Interaction Coefficients of Mo, B, Ni, Ti and Nb with Sn in Molten Fe–18mass%Cr AlloyHori, K., Kato, K. & Ono, H., 2024, In: Tetsu-To-Hagane/Journal of the Iron and Steel Institute of Japan. 110, 7, p. 513-521 9 p.

Research output: Contribution to journal › Article › peer-review

2023

3DPCによって作製したTiAl/Al基複合材料のTEM観察

佃　遥希, 土屋大樹, 李　昇原, 池野　進 & 松田健二, 2023.

Research output: Contribution to conference › Presentation

Analysis of antipruritic effects of SSRIs using various atopic dermatitis model mice

K, M., H, I., M, S., T, K. & D, U., 2023.

Research output: Contribution to conference › Presentation

Animal models of neuropathic and inflammatory pain enhance glutamatergic transmission in adult rat spinal dorsal horn in vitro and in vivo

D, U., M, S., K, M., Y, U., H, I., M, Y., K, K. & T, K., 2023.

Research output: Contribution to conference › Presentation

An Investigation of Compressive Creep Aging Behavior of Al-Cu-Li Alloy Pre-Treated by Compressive Plastic Deformation and Artificial Aging

Liu, J., Guo, F., Matsuda, K., Wang, T. & Zou, Y., 2023/03, In: Materials. 16, 5, 2054.

Research output: Contribution to journal › Article › peer-review

Open Access

Application of TiO₂ nanotubes as bulky supports of highly active CO₂ methanation catalysts prepared via the polygonal barrel-sputtering method

Inoue, M., Chung Peng, R., Sagami, H., Kasai, Y., Suga, T., Shibayanagi, T. & Abe, T., 2023/10/15, In: Materials Letters. 349, 134787.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Behavioral analysis of effects of a novel antipruritic drug using a mouse model of atopic dermatitis.

K, M., M, S., T, K. & D., U., 2023.

Research output: Contribution to conference › Presentation

Comparison of Mechanical Properties in Ultrafine Grained Commercial-Purity Aluminum (A1050) Processed by Accumulative Roll Bonding (ARB) and High-Pressure Sliding (HPS)

Tang, Y., Fujii, T., Hirosawa, S., Matsuda, K., Terada, D. & Horita, Z., 2023, In: Materials Transactions. 64, 8, p. 1902-1911 10 p.

Research output: Contribution to journal › Article › peer-review

Open Access

4 Scopus citations

Composite Formation of Anthrylene- and Ferrocenoyl-Substituted Phenyleneethynylenes with Single-Wall Carbon Nanotubes (SWCNTs)

Watanabe, H., Ekuni, K., Okuda, Y., Nakayama, R., Kawano, K., Iwanaga, T., Yamaguchi, A., Kiyomura, T., Miyake, H., Yamagami, M., Tajima, T., Kitai, T., Hayashi, T., Nishiyama, N., Kusano, Y., Kurata, H., Takaguchi, Y. & Orita, A., 2023/01, In: Bulletin of the Chemical Society of Japan. 96, 1, p. 57-64 8 p.

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Designing science lessons with socio-scientific issues and socio-scientific inquiry-based learning in Japan: A case study at upper secondary schools

Fujinami, Isozaki, K. & Tetsuo, 2023, In: EASE Letters. 2, p. 1-7

Research output: Contribution to journal › Article › peer-review

Effect of crystalline structure on the corrosion behavior of the Co-Cr-Mo alloy in 2.5 M H₂SO₄ + 0.2 M NaCl solution

Nakato, D., Hatakeyama, M., Nunomura, N. & Sunada, S., 2023/10, In: Corrosion Science. 223, 111471.

Research output: Contribution to journal › Article › peer-review

1 Scopus citations

Materials Design and Engineering

Research output

Search results