TY - CONF
T1 - Development of metal fitting to connect each fiber directions on intersecting timber elements direct and that practical use
AU - Ouji, Masashi
N1 - Publisher Copyright:
© WCTE 2021. All rights reserved.
PY - 2021
Y1 - 2021
N2 - We have conducted basic research and development of joint metal that gives rotational rigidity to timber joints with small cross sections. By developing this concept in near future, it is possible to construct a shear resistance element having openings on the wall and floor of a small wooden building. In addition, a moment resistance element is given to the column-beam joint of large cross section, and it can be applied to the reinforcement of traditional timber buildings. This paper shows the fundamental concept and the results of the research until present.
AB - We have conducted basic research and development of joint metal that gives rotational rigidity to timber joints with small cross sections. By developing this concept in near future, it is possible to construct a shear resistance element having openings on the wall and floor of a small wooden building. In addition, a moment resistance element is given to the column-beam joint of large cross section, and it can be applied to the reinforcement of traditional timber buildings. This paper shows the fundamental concept and the results of the research until present.
KW - Cross joint of timber element
KW - Joint metal
KW - Timber laminated lattice floor
KW - Timber lattice wall
UR - http://www.scopus.com/inward/record.url?scp=85120754072&partnerID=8YFLogxK
M3 - 学会論文
AN - SCOPUS:85120754072
T2 - World Conference on Timber Engineering 2021, WCTE 2021
Y2 - 9 August 2021 through 12 August 2021
ER -