Recycling of Mg-Al-Ca based alloy by vacuum distillation

Makoto Inoue, Nasashi Shima, Tadayoshi Tsukeda

研究成果: 会議への寄与学会論文

1 被引用数 (Scopus)

抄録

In this study, it examined recycling of a Mg-Al-Ca based alloy by vacuum distillation. The vacuum distillation used a vacuum distillation apparatus and it evacuated a vacuum and heated the Mg-Al-Ca based alloy to less than 1Pa at 600°C. Condenser temperature changed it into 280-420°C and performed it. It melted and cast the magnesium condensate which I collected by the vacuum distillation and investigated corrosion resistance and mechanical properties. The condensation ratio increased so that condenser temperature was low. The quantity of zinc decreased so that condenser temperature was high. The quantity of calcium increased slightly so that condenser temperature was high. Most of the other elements did not mix it. The corrosion resistance of castings was good. The elongation of castings became bigger than commercial pure magnesium.
本文言語英語
ページ223-226
ページ数4
DOI
出版ステータス出版済み - 2007

フィンガープリント

「Recycling of Mg-Al-Ca based alloy by vacuum distillation」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル