抄録
In this study, compression and recovery properties for metal gasket with straight sections and arc sections are studied by using the finite element method (FEM). When a metal gasket is subjected to clamp load, a contact width which is necessary for seal-up occurs due to flattening of the arcs. Then, the combination of the straight sections and the arc sections causes various deformation modes because the combination has a large effect on the characteristic of flattening. In other words, it is possible to control the flattening behaviour by adjusting the stiffness of the straight sections and the arc sections. Based on these facts, it is possible to propose a metal gasket in which the flattening occurs at the clamp load and the dent does not occur, furthermore, the clamp load does not descend very much at the tiny looseness.
| 本文言語 | 英語 |
|---|---|
| ページ（範囲） | 1701-1711 |
| ページ数 | 11 |
| ジャーナル | Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A |
| 巻 | 77 |
| 号 | 782 |
| DOI | |
| 出版ステータス | 出版済み - 2011 |
ASJC Scopus 主題領域
- 材料科学一般
- 材料力学
- 機械工学