Age-hardening behavior of Al-7-10%Si-0.3%Mg alloy castings with water quenching and direct quenching

Shota Komura, Seiji Saikawa, Kenji Matsuda, Susumu Ikeno

研究成果: 書籍の章/レポート/会議録会議への寄与査読

抄録

The solvus temperature of G.P. zones and/or clusters during the early stage of aging after solution treatment in Al-7%Si-0.3%Mg alloy was investigated by micro-vickers hardness measurement and transmission electron microscopy. In addition, the obtained result was compared the previous reported result of the Al-10%Si-0.3%Mg alloy. The alloys were cast by permanent mold process, homogenized at 813K for 36ks, cold rolled up to 68%, solution treated at 813K for 36ks, and then artificially aged at 348-523K after water-quenched (W.Q.) or direct-quenched into oil-bath at 348-523K for artificially aging (D.Q.). In the case of the aging temperature was highest, the peak hardness for the W.Q. condition was clearly higher than the D.Q. condition. This tendency is considered due to the difference of formation such as G.P. zones and/or clusters between W.Q. and D.Q. conditions. Also, these behaviors were similar to the previous reported result of the Al-10%Si-0.3%Mg alloy.

本文言語英語
ホスト出版物のタイトル72nd World Foundry Congress, WFC 2016
出版社The WFO (The World Foundry Organization Ltd)
ページ405-406
ページ数2
ISBN(電子版)9781510833128
出版ステータス出版済み - 2016
イベント72nd World Foundry Congress, WFC 2016 - Nagoya, 日本
継続期間: 2016/05/212016/05/25

出版物シリーズ

名前72nd World Foundry Congress, WFC 2016

学会

学会72nd World Foundry Congress, WFC 2016
国/地域日本
CityNagoya
Period2016/05/212016/05/25

ASJC Scopus 主題領域

  • 材料化学
  • 金属および合金

フィンガープリント

「Age-hardening behavior of Al-7-10%Si-0.3%Mg alloy castings with water quenching and direct quenching」の研究トピックを掘り下げます。これらがまとまってユニークなフィンガープリントを構成します。

引用スタイル