Reduction of spatter generation using atmospheric gas in laser powder bed fusion of Ti6Al4V

Laser powder bed fusion (LPBF), a typical additive manufacturing (AM) process, is a promising approach that enables high-accuracy manufacturing of arbitrary structures; therefore, it has been utilized in the aerospace and medical fields. However, several unexplained phenomena significantly affect the quality of fabricated components. In particular, it has been reported that the generation of spatters adversely affects the stability of fabrication process and degrades the performance of the fabricated components. To realize high-quality components, it is essential to suppress the generation of spatters. Thus far, the suppression of spatter generation has been attempted based on the process parameters; however, this has not been adequately discussed in terms of the fabrication atmosphere. Therefore, in this study, we focused on the fabrication atmosphere and investigated spatter generation using gas with different physical properties rather than conventionally used argon. It was observed that the spatter generation during the fabrication of the Ti6Al4V alloy could be significantly suppressed by changing the atmospheric gas, even under constant LPBF process parameters. We proved that the fabrication atmosphere is an important factor to be considered, apart from the process parameters, in AM technology.