Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system

Dan Chen; Pasquale Daponte; Domenico Grimaldi; Gerd Hofmann; Julius Komma; Francesco Lamonaca; Alfonso Nastro; Ronny Nawrodt; Francesco Picariello; Giuseppe Polimeni; Maria Riccio; Christian Schwarz; Kazuhiro Yamamoto

doi:10.1109/MetroAeroSpace.2014.6865972

Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system

Dan Chen, Pasquale Daponte, Domenico Grimaldi, Gerd Hofmann, Julius Komma, Francesco Lamonaca, Alfonso Nastro, Ronny Nawrodt, Francesco Picariello, Giuseppe Polimeni, Maria Riccio, Christian Schwarz, Kazuhiro Yamamoto

Department of Physics

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

1 Scopus citations

Abstract

The paper describes an automated measurement system for mechanical loss characterization of wires at cryogenic temperature. The important role of these measurements for the design of the Kamioka Gravitational Wave Detector (KAGRA) is highlighted. The experimental setup used to perform the measurements are presented and discussed. Furthermore, preliminary results obtained for a tungsten wire in term of quality factor are reported.

Original language	English
Title of host publication	2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings
Publisher	IEEE Computer Society
Pages	479-483
Number of pages	5
ISBN (Print)	9781479920693
DOIs	https://doi.org/10.1109/MetroAeroSpace.2014.6865972
State	Published - 2014
Event	2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Benevento, Italy Duration: 2014/05/29 → 2014/05/30

Publication series

Name	2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings

Conference

Conference	2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014
Country/Territory	Italy
City	Benevento
Period	2014/05/29 → 2014/05/30

Keywords

automatic measurement system
cryogenics
gravitational wave detector
mechanical loss
thermal noise

ASJC Scopus subject areas

Aerospace Engineering

Access to Document

10.1109/MetroAeroSpace.2014.6865972

Cite this

Chen, D., Daponte, P., Grimaldi, D., Hofmann, G., Komma, J., Lamonaca, F., Nastro, A., Nawrodt, R., Picariello, F., Polimeni, G., Riccio, M., Schwarz, C., & Yamamoto, K. (2014). Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system. In 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings (pp. 479-483). Article 6865972 (2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings). IEEE Computer Society. https://doi.org/10.1109/MetroAeroSpace.2014.6865972

Chen, Dan ; Daponte, Pasquale ; Grimaldi, Domenico et al. / Mechanical loss characterization at cryogenic temperature of a tungsten wire : An automated measurement system. 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings. IEEE Computer Society, 2014. pp. 479-483 (2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings).

@inproceedings{b4fdf66cf05346d78a1a41c4be444131,

title = "Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system",

abstract = "The paper describes an automated measurement system for mechanical loss characterization of wires at cryogenic temperature. The important role of these measurements for the design of the Kamioka Gravitational Wave Detector (KAGRA) is highlighted. The experimental setup used to perform the measurements are presented and discussed. Furthermore, preliminary results obtained for a tungsten wire in term of quality factor are reported.",

keywords = "automatic measurement system, cryogenics, gravitational wave detector, mechanical loss, thermal noise",

author = "Dan Chen and Pasquale Daponte and Domenico Grimaldi and Gerd Hofmann and Julius Komma and Francesco Lamonaca and Alfonso Nastro and Ronny Nawrodt and Francesco Picariello and Giuseppe Polimeni and Maria Riccio and Christian Schwarz and Kazuhiro Yamamoto",

year = "2014",

doi = "10.1109/MetroAeroSpace.2014.6865972",

language = "英語",

isbn = "9781479920693",

series = "2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings",

publisher = "IEEE Computer Society",

pages = "479--483",

booktitle = "2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings",

note = "2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 ; Conference date: 29-05-2014 Through 30-05-2014",

}

Chen, D, Daponte, P, Grimaldi, D, Hofmann, G, Komma, J, Lamonaca, F, Nastro, A, Nawrodt, R, Picariello, F, Polimeni, G, Riccio, M, Schwarz, C & Yamamoto, K 2014, Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system. in 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings., 6865972, 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings, IEEE Computer Society, pp. 479-483, 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014, Benevento, Italy, 2014/05/29. https://doi.org/10.1109/MetroAeroSpace.2014.6865972

Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system. / Chen, Dan; Daponte, Pasquale; Grimaldi, Domenico et al.
2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings. IEEE Computer Society, 2014. p. 479-483 6865972 (2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Mechanical loss characterization at cryogenic temperature of a tungsten wire

T2 - 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014

AU - Chen, Dan

AU - Daponte, Pasquale

AU - Grimaldi, Domenico

AU - Hofmann, Gerd

AU - Komma, Julius

AU - Lamonaca, Francesco

AU - Nastro, Alfonso

AU - Nawrodt, Ronny

AU - Picariello, Francesco

AU - Polimeni, Giuseppe

AU - Riccio, Maria

AU - Schwarz, Christian

AU - Yamamoto, Kazuhiro

PY - 2014

Y1 - 2014

N2 - The paper describes an automated measurement system for mechanical loss characterization of wires at cryogenic temperature. The important role of these measurements for the design of the Kamioka Gravitational Wave Detector (KAGRA) is highlighted. The experimental setup used to perform the measurements are presented and discussed. Furthermore, preliminary results obtained for a tungsten wire in term of quality factor are reported.

AB - The paper describes an automated measurement system for mechanical loss characterization of wires at cryogenic temperature. The important role of these measurements for the design of the Kamioka Gravitational Wave Detector (KAGRA) is highlighted. The experimental setup used to perform the measurements are presented and discussed. Furthermore, preliminary results obtained for a tungsten wire in term of quality factor are reported.

KW - automatic measurement system

KW - cryogenics

KW - gravitational wave detector

KW - mechanical loss

KW - thermal noise

UR - http://www.scopus.com/inward/record.url?scp=84907367771&partnerID=8YFLogxK

U2 - 10.1109/MetroAeroSpace.2014.6865972

DO - 10.1109/MetroAeroSpace.2014.6865972

M3 - 会議への寄与

AN - SCOPUS:84907367771

SN - 9781479920693

T3 - 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings

SP - 479

EP - 483

BT - 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings

PB - IEEE Computer Society

Y2 - 29 May 2014 through 30 May 2014

ER -

Chen D, Daponte P, Grimaldi D, Hofmann G, Komma J, Lamonaca F et al. Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system. In 2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings. IEEE Computer Society. 2014. p. 479-483. 6865972. (2014 IEEE International Workshop on Metrology for Aerospace, MetroAeroSpace 2014 - Proceedings). doi: 10.1109/MetroAeroSpace.2014.6865972

Mechanical loss characterization at cryogenic temperature of a tungsten wire: An automated measurement system

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Fingerprint

Cite this