Effect of specimen thickness and stress intensity factor range on plasticity-induced fatigue crack closure in a7075-t6 alloy

Fatigue crack growth experiments are performed using A7075-T6 compact tension (CT) specimens with various thicknesses t (1-21 mm). The stress intensity factor at the crack opening level Kop is measured, and the effects of t and the stress intensity factor range ΔK on Kop are inves-tigated. In addition, the change in Kop value due to specimen surface removal is investigated. Fur-thermore, we clarify that the radius of curvature of the leading edge of the fatigue crack decreases as t becomes thinner. Using the three-dimensional elastoplastic finite element method, the amount of plastic lateral contraction (depression depth d) at the crack tip after fatigue loading is calculated quantitatively. The following main experimental results are obtained: In the region where ΔK is 5 MPam^1/2 or higher, the rate of fatigue crack growth da/dN at a constant ΔK value increases as t increases from 1 to 11 mm. The da/dN between t = 11 and 21 mm is the same. Meanwhile, in the region where ΔK is less than 5 MPam^1/2, the effect of t on da/dN is not observed. The effects of t and ΔK on the da/dN–△K relationship are considered physically and quantitatively based on d.