Development of advanced Mg-SiC particulate composite by mixing extrusion process

松木, 賢司 (Principal Investigator)
Takatsuji, Norio (Co-Investigator(Kenkyū-buntansha))
AIDA, Tetsuo (Co-Investigator(Kenkyū-buntansha))

University of Toyama

9 Article
1 Review article

10 results

2004

AZ31マグネシウム合金切削チップのECAP均質固化成形
會田哲夫, 2004, In: 軽金属 54・11. p. 532-537
Research output: Contribution to journal › Article › peer-review
Homogeneous consolidation process by ECAP for AZ31 cutting chips
Aida, T., Takatsuji, N., Matsuki, K., Kamado, S. & Kojima, Y., 2004/11, In: Keikinzoku/Journal of Japan Institute of Light Metals. 54, 11, p. 532-537 6 p.
Research output: Contribution to journal › Review article › peer-review

Open Access
14 Scopus citations
Hot extrudability of Mg-Al-Zn based alloy cutting chips and surface properties of extrusions
Sato, H., Aida, T., Takatsuji, N., Matsuki, K. & Murotani, K., 2004/01, In: Keikinzoku/Journal of Japan Institute of Light Metals. 54, 1, p. 14-18 5 p.
Research output: Contribution to journal › Article › peer-review

Open Access
6 Scopus citations
Mg-Al-Zn合金切削チップの熱間押出性と形材表面性状
佐藤寿, 2004, In: 軽金属 54・1. p. 14-18
Research output: Contribution to journal › Article › peer-review
2005
Improvement in surface properties of extrusions from Mg-Al-Zn based alloy machined chips
Aida, T., Takatsuji, N., Matsuki, K., Ohara, T. & Kamado, S., 2005/09, In: Keikinzoku/Journal of Japan Institute of Light Metals. 55, 9, p. 400-404 5 p.
Research output: Contribution to journal › Article › peer-review

Open Access
4 Scopus citations
Mg-Al-Zn合金切削チップ熱間押出材の表面性状の改善
會田哲夫, 2005, In: 軽金属 55・9. p. 400-404
Research output: Contribution to journal › Article › peer-review
Mg-Al-Zn系合金切削チップ熱間押出材の表面性状の改善
會田哲夫, 高辻則夫, 松木賢司, 小原卓 & 鎌土重晴, 2005, In: 軽金属 55巻・9号. p. 400-404
Research output: Contribution to journal › Article › peer-review
2006

AZ31Bマグネシウム合金切削チップ押出し材の特性に及ぼす押出速度の影響
會田哲夫, 高辻則夫, 松木賢司, 小原卓 & 鎌土重晴, 2006, In: 軽金属 56巻・3号. p. 166-171
Research output: Contribution to journal › Article › peer-review
AZ31Bマグネシウム合金切削チップ押出材の特性に及ぼす押出速度の影響
会田哲夫, 高辻則夫, 松木賢司, 小原卓 & 鎌土重晴, 2006, In: 軽金属 56. p. 166-171
Research output: Contribution to journal › Article › peer-review
Effect of extrusion speed on properties of the extruded AZ31B magnesium alloy machined chip
Aida, T., Takatsuji, N., Matsuki, K., Ohara, T. & Kamado, S., 2006/03, In: Keikinzoku/Journal of Japan Institute of Light Metals. 56, 3, p. 166-171 6 p.
Research output: Contribution to journal › Article › peer-review

Open Access
13 Scopus citations

Development of advanced Mg-SiC particulate composite by mixing extrusion process

Research output

Search results